-Galvamet- Stucco

Galvatherm Stucco Wall panel is an exterior wall panel with a unique embossing pattern that simulates the look of concret masonry stucco. It is ideal for projects where the performance and economy of metal panel is needed but where aesthetics of the old style stucco finishes are desired.

	FEATURES AND BENEFITS
		This panel is flush with no ribs or striations.
		The Stucco Wall panel can be applied vertically or horizontally.
		With its concealed fastener design and standard colors like sandstone and surreybeige the Galvatherm stucco wall really has the look of masonry stucco walls.

PRODUCT PARAMETERS

Panel Thicknesses

2” 2.5” 3” 4” 5” 6”

Insulating Values (1)

R=17 R=22 R=26 R=34 R=43 R=52

Panel Width

42”

Panel Length

From 8’ min to 40’ max length.

Insulation Material

CFC free foamed in place isocyanurate with a nominal density of
2.4 Lbs/cu ft.

Joint Configuration

Off set tongue and groove.

Coatings
Exterior	26 ga galvanized and pre painted steel. 22 and 24 ga available upon request. Please consult your sales representative.
Interior	26 ga galvanized and pre painted steel.26 ga and 304 type embossed stainless steel available upon request. Please consult your sales representative

Accessories

Fasteners, concealed fastener clip, brake formed flashing to match panels, sealants.

Coatings
Exterior	PVDF polymer 70% Kynar 500/Hylar 5000 or Siliconized polyester are standar finishes.
Interior	Siliconized polyester is standard finish. PVC plastisol available upon request. Please consult your sales representative.

Note: 1) Foam Insulation factors are based on nominal initial k factor of 0.116 BTU/ft².h.°F tested as per ASTM C518-04 at a mean temperature of 40°F (4°C)