-Galvamet- Shadow

Galvatherm Shadowline profile panel is ideal for interior partition walls or exterior building walls and soffits where a light vertical accent line is preferred. This panel is a mirror image with both the interior and exterior sides of the panel profiled with the same vertical shadowline.

	FEATURES AND BENEFITS
		Foam insulation is applied to this panel as a self rising liquid thus creating a solid monolithic panel with no room for interstitial condensation.
		The composite engagement of the foam/metal bond generates an extremely strong and well insulated panel that can meet long span requirements as an exterior wall or as an interior partition.
		PVC coating (Plastisol) and 304 grade stainless steel in the liner is available for tough food processing wash down applications.

PRODUCT PARAMETERS

Panel Thicknesses

2” 2.5” 3” 4” 5” 6”

Insulating Values (1)

R=17 R=22 R=26 R=34 R=43 R=52

Panel Width

42”

Panel Length

From 8’ min to 50’ max length.

Insulation Material

CFC free foamed in place isocyanurate with a nominal density of
2.4 Lbs/cu ft.

Joint Configuration

Concealed fastening off set tongue and groove.

Coatings
Exterior	26 ga galvanized and pre painted steel. 22 and 24 ga available upon request. Please consult your sales representative.
Interior	26 ga galvanized and pre painted steel. 26ga and 304 type embossed stainless steel available upon request. Please consult your sales representative

Accessories

Fasteners, concealed fastener clip, brake formed flashing to match panels, sealants.

Coatings
Exterior	PVDF polymer 70% Kynar 500/Hylar 5000 or Siliconized polyester are standar finishes.
Interior	Siliconized polyester is standard finish. PVC plastisol available upon request. Please consult your sales representative.

Note: 1) Foam Insulation factors are based on nominal initial k factor of 0.116 BTU/ft².h.°F tested as per ASTM C518-04 at a mean temperature of 40°F (4°C)