Hi Rib panel
is a versatile panel equally at home as a wall
or roof panel. The ribs of the panel produce an
extremely strong section that can span long distances
between wall girts and roof joists/purlins. It
is available up to 6” thick ,making it ideal
for applications needing strong, well insulated
metal walls and roofs. This system can be completed
with the innovative GT-1 connection which mates
the roof and wall in a continuous curve eliminating
eave trim and gutters.
FEATURES AND BENEFITS
Hi Rib panel is available in thicknesses up to 6”.
The panel’s structural fasteners give it the
strength to meet FM and UL uplift requirements;
batten caps are an available option.
Hi Rib panel is also available in thickness as little
as 1.5” making it a rugged and economical
insulated roof panel for industrial and warehousing
projects where a budget is critical.
PRODUCT PARAMETERS
Panel Thicknesses
1.5” 2”
2.5” 3”
4” 6”
Insulating
Values (1)
R=13
R=17 R=22 R=26 R=34 R=52
Panel Width
39 3/8
Panel Length
From 8’
min to 50’ max length.
Insulation
Material
CFC free foamed
in place isocyanurate with a nominal density
of
2.4 Lbs/cu ft.
Joint Configuration
Hi Rib overlapping
joint.
Coatings
Exterior
26 ga, galvanized
and pre painted steel. 24 ga and 22 ga available
Upon request. Please consult your sales representative.
Interior
26
ga, galvanized and pre painted steel. 24 ga
and 22 ga available Upon request. Please consult
your sales representative.
Accessories
Fasteners, concealed
fastener clip, brake formed flashing to match
panels, sealants.
Metal Facings
Exterior
Siliconized
Polyester or PVDF polymer 70% kynar 500/ Hylar
5000 as a standar finish
Interior
Siliconized
polyester as a standard finish.
Note:
1) Foam Insulation factors are based on nominal initial k factor of 0.116 BTU.in/hr.ft2°F tested as per ASTM C518-04 at a mean temperature of 40°F (4°C)
Hi Rib Profile
& GT-1 System
The GT-1 system
is an innovative profiled sheet that can be
used to join Hi Rib roof and wall panels at
the eave detail or can be used as a separate
architectural element.
FEATURES AND
BENEFITS
GT-1 is available in
Pre-painted finish.
The net coverage is 39.37”. Lengths
are cut to order. The minimum internal radius
is 19-5/8”.
Hi Rib panel is available in thicknesses up to 6”.
