-Galvamet- Galvatherm Mesa

The Galvatherm Mesa panel is ideal for exterior walls on industrial and cold storage facilities. The 42” wide panel installs quickly and economically. Fasteners are concealed within the panel side joint and the attractive “Mesa” profile breaks up the flat expanse of metal on large-scale projects such as automobile plants and cold storage warehouses.

	FEATURES AND BENEFITS
		The panel’s double tongue and groove self aligning and weather tight and allows for sealant application at either the interior or exterior side of the panel joinery depending on the direction of vapor drive.
		The standard metal surface is 26 gauge galvanized steel with 20 year warranted siliconized polyester or PVDF coatings.
		The panel arrives on site in one piece and requires a simple one step installation reducing construction time and costs.

PRODUCT PARAMETERS

Panel Thicknesses

2” 2.5” 3” 4” 5” 6”

Insulating Values (1)

R=17 R=22 R=26 R=34 R=43 R=52

Panel Width

42”

Panel Length

From 8’ min to 50’ max length.

Insulation Material

CFC free foamed in place isocyanurate with a nominal density of
2.4 Lbs/cu ft.

Joint Configuration

Concealed fastening off set tongue and groove.

Metal Facings
Exterior	26 ga galvanized and pre painted steel. 22 and 24 ga available upon request. Please consult your sales representative.
Interior	26 ga galvanized and pre painted steel.26 ga and 304 type embossed stainless steel available upon request. Please consult your sales representative

Accessories

Fasteners, concealed fastener clip, brake formed flashing to match panels, sealants.

Coatings
Exterior	PVDF polymer 70% Kynar 500/Hylar 5000 or Siliconized polyester are standar finishes.
Interior	Siliconized polyester is standard finish. PVC plastisol available upon request. Please consult your sales representative.

Note: 1) Foam Insulation factors are based on nominal initial k factor of 0.116 BTU/ft².h.°F tested as per ASTM C518-04 at a mean temperature of 40°F (4°C)